Model 250 Tyer

Model 250 Tyler Equipment - Hanscom Inc.

This Hanscom Model 250 Tyer goes where needed. Place this Tyer on your production line and get ready to fasten bundles, coils and hanks at a faster pace than you ever thought possible.

Just push one single button for fast, precise tying of your product. The Tyer neatly cuts, wraps and twist a length of Hanscom Ty-Stock around a product in less than 1 1/2 seconds flat. The result is a faster, more accurate and more uniformly tied package. The same consistent results time after time.

The Hanscom Tyer is also extremely versatile. It is easily adjusted to apply any Ty length from 3" to 10" around bundles up to 3" thick at the point of fastening.

Hanscom's Tyer makes tying easy.

Physical Dimensions (Approximate)
	Height	50"
	Width	21"
	Depth	40"
	New Weight	475lbs.
	Shipping Weight	600lbs.
	Height of Workstation (From Floor)	35"

Package Dimensions
	Maximum Bundle Diameter at Point of Fastening	3"
	Minimum Bundle Diameter at Point of Fastening	5/16"
	Hanscom Ty-Stock Length	2" - 10"

Power Requirements
	Electrical-Standard, Single Phase	120 V. 60 Hz
	Electrical-Optional, Single Phase	220 V. 50 Hz
	Power Service	15 amp.

Lubrication
	Modular tying unit has sealed oil pan and no additional internal lubrication is required. Pivot points, bearing and busing are self-lubricated, insuring years of trouble free operation.

Maximum Cycle Rate		40/MIN

Model 501-E

Electro-Payoff Model 501-E Equipment - Hanscom Inc.

The Hanscom bench top Electro-Payoff Model 501-E automatically feeds and cuts spooled Hanscom-Ties to selected lengths from 2 - 22 inches. This portable, rugged, wire tie dispenser goes anywhere and will dramatically boost your production rates.

In the manual mode of operation, the machine feeds, cuts and holds the tie. Once the tie is taken the machine instantly repeats this cycle, feeding another tie of the same length.

Physical Dimensions
	Height	6.5 in.	167mm
	Width	6.75 in.	173mm
	Depth	16 in.	410mm
	Net Weight	7.25 lbs.	3.3 kg

Power Requirments
	Electrical Single Phase	120 v, 60 Hz
	Power Service	5 - 15 Amp

Maximum Cycle Rate		25/MIN

Dispensed Length of Hanscom-Ties
	Minimum	2 in.	51mm
	Maximum	22 in.	564mm
	Adjustable between 2 - 22"

Equipment

Model 250 Tyer

Physical Dimensions (Approximate)

Package Dimensions

Power Requirements

Lubrication

Maximum Cycle Rate

Model 501-E

Physical Dimensions

Power Requirments

Maximum Cycle Rate

Dispensed Length of Hanscom-Ties